Incident Description
BRIAN bitrate traffic was not computed or saved for approximately 21 hours.
The reason for degradation:
- Failure to connect or write data to InfluxDB
- Local system partition errors
- cf. IT incident: 30052022
The impact of this service degradation was:
- Data points between 12:50 and 9:30 UTC were temporarily not visible in the BRIAN gui
Incident severity: CRITICAL Intermittent service outage
Data loss: NO
Total duration of incident: 21 hours/On going (as of 22:22 UTC)
Timeline
All times are in UTC
| Date | Time (UTC) | Description |
|---|---|---|
| 12:52:37 | the first evidence of this incident appeared in the logs of prod-poller-processor.geant.org May 30 12:52:37 prod-poller-processor kapacitord[124994]: ts=2022-05-30T12:52:37.802Z lvl=error msg="failed to write points to InfluxDB" service=kapacitor task_master=main task=remove_spikes_gwsd_rates node=influxdb_out3 err=timeout May 30 12:52:38 prod-poller-processor kapacitord[124994]: ts=2022-05-30T12:52:38.069Z lvl=error msg="encountered error" service=kapacitor task_master=main task=remove_spikes_interface_rates node=remove_spikes2 err="keepalive timedout, last keepalive received was: 2022-05-30 12:52:28.069298439 +0000 UTC" |
| afternoon | Several performance issues started to become apparent:
|
| 19:08 | Keith Slater (and others) alerted on the #brian channel that data was missing in the BRIAN gui |
| 20:30 | Bjarke Madsen replied that is seemed related to service problems seen earlier in the day |
| 21:12 | Massimiliano Adamo replied on #swd-private that we had raised an issue with VMWare |
| 23:28 | Linda Ness sent a mail to gn4-3-all@lists.geant.org indicating several services are down |
| 12:53 | continuous failures writing to Influx, or resolving the hostname: May 31 00:49:08 prod-poller-processor kapacitord[54933]: ts=2022-05-31T00:49:08.133Z lvl=error msg="failed to write points to InfluxDB" service=kapacitor task_master=main task=interface_rates node=influxdb_out12 err=timeout May 31 01:26:44 prod-poller-processor kapacitord[54933]: ts=2022-05-31T01:26:44.163Z lvl=error msg="failed to connect to InfluxDB, retrying..." service=influxdb cluster=read err="Get https://influx-cluster.service.ha.geant.org:8086/ping: dial tcp: lookup influx-cluster.service.ha.geant.org on 83.97.93.200:53: no such host" |
| 08:12 | |
| 02:34-08:11 | also lots of i/o errros in the logs May 31 02:34:59 prod-poller-processor kernel: [1754481.561423] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561427] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 02 05 63 f0 00 00 08 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561442] EXT4-fs warning (device dm-0): ext4_end_bio:302: I/O error -5 writing to inode 149650 (offset 0 size 0 starting block 702078) May 31 02:34:59 prod-poller-processor kernel: [1754481.561494] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561497] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 ef d3 18 00 00 10 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561529] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561532] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 af dd b0 00 00 10 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561550] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561553] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 f3 b3 d0 00 00 08 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561567] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1086s May 31 02:34:59 prod-poller-processor kernel: [1754481.561569] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 aa 75 90 00 00 18 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561579] EXT4-fs warning (device dm-4): ext4_end_bio:302: I/O error -5 writing to inode 73 (offset 4927488 size 8192 starting block 1005746 ) May 31 02:34:59 prod-poller-processor kernel: [1754481.561632] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561635] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 ef b1 90 00 00 08 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561675] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561678] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 ef d3 48 00 00 10 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561696] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561699] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 ef d3 68 00 00 a0 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561758] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561761] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 af c6 68 00 00 20 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561789] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=1084s May 31 02:34:59 prod-poller-processor kernel: [1754481.561792] sd 0:0:0:0: [sda] CDB: Write(10) 2a 00 01 ef b4 f0 00 00 10 00 May 31 02:34:59 prod-poller-processor kernel: [1754481.561814] EXT4-fs warning (device dm-0): ext4_end_bio:302: I/O error -5 writing to inode 131114 (offset 0 size 0 starting block 1029894) May 31 02:34:59 prod-poller-processor kernel: [1754481.561852] EXT4-fs warning (device dm-0): ext4_end_bio:302: I/O error -5 writing to inode 131105 (offset 14843904 size 12288 starting block 261672) May 31 02:34:59 prod-poller-processor kernel: [1754481.626924] JBD2: Detected IO errors while flushing file data on dm-0-8 |
| 07:34 | Keith Slater took ownership of informing APM's |
| 08:12 | Pete Pedersen stopped the system and fixed the corrupt partition. |
| 08:26:55 | System was rebooted. |
| 08:26:55 | haproxy failed to start because it couldn't resolve prod-inventory-provider0x.geant.org May 31 08:26:55 prod-poller-processor haproxy[976]: [ALERT] 150/082655 (976) : parsing [/etc/haproxy/haproxy.cfg:30] : 'server prod-inventory-provider01.geant.org' : could not resolve address 'prod-inventory-provider01.geant.org'. May 31 08:26:55 prod-poller-processor haproxy[976]: [ALERT] 150/082655 (976) : parsing [/etc/haproxy/haproxy.cfg:31] : 'server prod-inventory-provider02.geant.org' : could not resolve address 'prod-inventory-provider02.geant.org'. |
| 08:27:07 | Kapacitor tasks failed to run because the haproxy service wasn't running, for example: May 31 08:27:07 prod-poller-processor kapacitord[839]: ts=2022-05-31T08:27:07.962Z lvl=info msg="UDF log" service=kapacitor task_master=main task=service_enrichment node=inventory_enrichment2 text="urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='localhost', port=8080): Max retries exceeded with url: /poller/interfaces (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f749f4a2978>: Failed to establish a new connection: [Errno 111] Connection refused',))"
|
| 08:41:11 | puppet ran and restarted haproxy. this time dns resolution was back to normal, and haproxy successfully started ... but Kapacitor tasks were still in a non-executing state |
| 09:27:10 | manual restart of Kapacitor. Normal system behavior restored |
| 10:39 | Sam Roberts copied the lost data points from UAT to production
|
Proposed Solution
- The core issue seems to be related to VMWare and IT need to provide a solution