...
Code Block |
---|
[channels] language=xx switchtype = euroisdn signalling = pri_cpe pridialplan = unknown prilocaldialplan = unknown echocancel=64 echotraining = 150 echocancelwhenbridged=yes ;txgain=-4 ;rxgain=-4 immediate=no group = 1 context = fpstn channel => 1-15,17-30 acountcode = fpstn |
Next, we have to setup SIP side of our gateway. We will do this in /etc/asterisk/sip.conf. We will not allow unauthenticated clients (we will route them into context guest, see above). Set your realm and domain to something usefull which should be unique. Putting your real domain there is realy good point of start. But remember, this domain and realm setting has to corespond to settings in client, see above. Only opensource codecs are enabled by default. If you buy or own g.729 codec, you can enable it. Again, set language to fit your needs. Localnets are defined to better recognisation of NAT. Lines starting with jb are turning on jitterbuffer which is good to enable. Next, we define phones which we will use. In example, we use 3-digit dialplan and we are starting with number 200. Define next sip clients to fit your needs. It is good if username corespond with peer name (name in \ [\]). It is possible to use database for storing SIP users, which is better for bigger systems, but it is not scope of this document. See [http://www.voip-info.org/wiki/view/Asterisk+RealTime+Sip] or [http://www.sineapps.com/news.php?rssid=1105] for more informations. Wiki Markup
sip.conf
Code Block |
---|
[general] context=guest ; Default context for incoming calls (non authenticated) realm=somecompany.com domain=somecompany.com disallow=all ; First disallow all codecs ;allow=g729 allow=gsm allow=alaw allow=ulaw language=xx ; Default language setting for all users/peers localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks localnet=10.0.0.0/255.0.0.0 ; Also RFC1918 localnet=172.16.0.0/12 ; Another RFC1918 with CIDR notation localnet=169.254.0.0/255.255.0.0 ;Zero conf local network jbenable=yes jbforce=yes jbimpl = fixed [200] username=200 secret=somesecret200 type=friend host=dynamic context=sip [201] username=201 secret=somesecret201 type=friend host=dynamic context=sip [...] ... ... |
...