Page History

Details on accessing the WiFiMon GUI are available from here.

                                        Figure 1: WiFiMon login page

The following tabs are available from the WiFiMon GUI:

This dashboard includes measurements obtained using TWAMP among the WiFiMon Hardware Probes and the WiFiMon Test Server.

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

1. Pie Statistics for current day, automatically updated every 30 seconds

2. Table Statistics for current day, automatically updated every 30 seconds

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

1. Clients Maps, map with the measurement count from clients location in current day, automatically updated every 30 seconds

2. APs Maps, map with the measurement count from APs location in current day, automatically updated every 30 seconds

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

1. Subnets: Add/remove Subnets that are allowed to perform measurements

2. Access Points: Add remove information (MAC, latitude, longitude, etc.) about Access Points (necessary to depict measurements in APs Maps page)

3. Users: Add/remove users to login to the WiFiMon GUI (role "USER" does not have access "Configuration" and "Guide" tabs)

4. Privacy / Correlation: Hide/show user-related data, select the method to allow the correlation between measurements, client IP and AP MAC

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

WiFiMon Leaflet

                              Figure 2: Overview tab of WiFiMon GUI

Overview of the measurements for the current day, automatically updated every 30 seconds

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

Measurements for the current day, automatically updated every 30 seconds

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

This tab includes performance measurements from WiFiMon End Users (not WiFiMon Hardware Probes) in the monitored Subnets. By default, the measurements of all WiFiMon End Users are depicted regardless of the Subnet they reside. Visualizing measurements for a specific Subnet requires adding a Kibana filter (along with the existing one) from the "Add filter" option on top. For the example subnet a.b.c.d/xx, the Kibana filter is "requesterSubnet is a.b.c.d/xx".

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

This tab includes measurements from the monitored WiFiMon Hardware Probes (not WiFiMon End Users) in the monitored Subnets. By default, the measurements of all WiFiMon Hardware Probes are depicted. Visualizing measurements for a specific WiFiMon Hardware Probe requires adding a Kibana filter (along with the existing one) from the "Add filter" option on top. Each WiFiMon Hardware Probe is assigned a number. For the measurements of the WiFiMon Hardware Probe assigned the number "1", the required Kibana filter is "probeNo is 1". Assigning a number in each WiFiMon Hardware Probe is possible via the "testtool" attribute of the WiFiMon monitored test pages. More information is available in the WiFiMon Test Server installation guide.

Note: If you want to see results in different times you can select the three dots at the right corner and select the time that you wish to view results for.

                                                Figure 3: TWAMP tab

WiFiMon GIF