...
- A Raspberry Pi 3 Model B+ or a newer model
- A micro SD card with at least 16GB
- WiFiMon Raspberry Pi operating system image (Installation option 1) or Raspberry Pi with installed Raspberry Pi OS (Installation option 2)
Setting up the WHP
There are two options for the WHP installation:
- Installation and configuration from the prepared WiFiMon WHP image (Installation option 1)
- Installation and configuration on the Raspberry Pi with already installed Raspberry Pi OS (Stretch or later) (Installation option 2)
Installation and configuration
The following steps apply for both installation options. WiFiMon administrators who will use the prepared WHP image (installation option 1) should simply edit the crontab and wireless.py and twping_parser.py files as discussed in the following. WiFiMon administrators who will not use the prepared WIFiMon WHP image (installation option 2) should follow the steps 2 up to 5.
Step 1: Write the image to the micro SD card
Follow the instructions at the official Raspberry Pi site. Skip the "Download the image" step and use the WiFiMon Raspberry Pi operating system image instead (download size is approx. 3.5 GB).
...
We advise the WiFiMon administrator to always secure Raspberry Pi by changing the default password.
Step 2: Start the Raspberry Pi
Follow the simple steps below:
...
You should see a red light on the Raspberry Pi and raspberries on the monitor. The WiFiMon Hardware Probe will boot up into a graphical desktop.
Step 3: Configure the Raspberry Pi
Secure the Raspberry Pi by changing the default password. Optionally, you may enable SSH to access the command line of a Raspberry Pi remotely or setup remote desktop. Next, you have to connect to the wireless network you want to measure.
...
Line 2 of the crontab is related to the streaming of TWAMP measurement results to the WiFiMon Analysis Server (WAS).
Step 4: Streaming Wireless Network Interface Metrics to the WiFiMon Analysis Server (WAS)
In /home/pi, you will find the Python script wireless.py. The contents of the script are the following:
wireless.py
...
|
Step 5: Streaming TWAMP Measurement Results to the WiFiMon Analysis Server (WAS)
In /home/pi, you will find the Python script twping_parser.py. The contents of the script are the following:
twping_parser.py
...
sudo apt update |
Step 6: Support for distributed control
sudo apt install -y salt-minion
...
Note: This setup requires you to name WHP testpages with names matching the WHP description, e.g. for "wifimon-5", testpages should be named nettestwifimon-5.html, boomerangwifimon-5.html and speedworkerwifimon5.html
Security Issues
We suggest that you take additional efforts to safeguard the security of your probes:
...