Page History

Info

This guide describes how the Shibboleth v3 SP can be configured as a SAML Service Provider for eduTEAMS.

Shibboleth (pronounced "Shibboleth") is the reference implementation of the OASIS SAML standard.

Setting up the Shibboleth Service Provider is beyond the scope of this document. Many resources are available, such as the Shibboleth Wiki (https://wiki.shibboleth.net) and the installation instructions supplied and maintained by SWITCH (https://www.switch.ch/aai/guides/sp/installation/).

It is assumed in the following that you are using Shibboleth's v3 SP alongside the Apache webserver. If you are using a different webserver, the configuration of the SP should remain the same, with any differences being a requirement of your chosen web server.

1. Shibboleth configuration

Locate the file shibboleth2.xml. For example, using the switch.ch instructions (see above) for an Ubuntu Linux system, you will find the file at /etc/shibboleth/shibboleth2.xml.

We show to the right, sections of the file in which you will need to enter information relevant to your installation.

Enter your [your_sp_entity_id]:

eg https://example.com/shibboleth

Code Block

language	xml

<!-- By default, in-memory StorageService, ReplayCache, ArtifactMap, and SessionCache are used. See example-shibboleth2.xml for samples of explicitly configuring them. -->
<!-- The ApplicationDefaults element is where most of Shibboleth's SAML bits are defined. -->
<ApplicationDefaults entityID="[your_sp_entity_id]"
    REMOTE_USER="eduPersonUniqueId"
    cipherSuites="DEFAULT:!EXP:!LOW:!aNULL:!eNULL:!DES:!IDEA:!SEED:!RC4:!3DES:!kRSA:!SSLv2:!SSLv3:
                  !TLSv1:!TLSv1.1"
    >

Make sure handlerSSL="true" cookieProps="https" exist as follows:

Code Block

language	xml

        <Sessions lifetime="28800" timeout="3600" relayState="ss:mem"
                  checkAddress="false" handlerSSL="true" cookieProps="https">

Enter your [vo_entity_id]:

eg https://proxy.eduteams.org/proxy

Code Block

language	xml

<!--
Configures SSO for a default IdP. To properly allow for >1 IdP, remove
entityID property and adjust discoveryURL to point to discovery service.
You can also override entityID on /Login query string, or in RequestMap/htaccess.
-->
<SSO entityID="https://proxy.eduteams.org/proxy">
SAML2
</SSO>

Enter [your_support_email_address]:

eg support@example.com

Code Block

language	xml

<!--
        Allows overriding of error template information/filenames. You can
        also add your own attributes with values that can be plugged into the
        templates, e.g., helpLocation below.
        -->
        <Errors supportContact="[your_support_email_address]"
            helpLocation="/about.html"
            styleSheet="/shibboleth-sp/main.css"/>

Add the filename of the local copy of the eduTEAMS proxy's metadata

Code Block

language	xml

       <!-- Example of locally maintained metadata. -->
        <!--
        <MetadataProvider type="XML" validate="true" path="partner-metadata.xml"/>
        -->
       <!-- Metadata for the eduTEAMS proxy -->
       <MetadataProvider type="XML" validate="true" path="proxy.eduteams.org-frontend.xml" />

Now save a copy of the eduTEAMS proxy metadata to the file /etc/shibboleth/proxy.eduteams.org-frontend.xml

eg

wget "https://proxy.acc.eduteams.org/metadata/frontend.xml" -o /etc/shibboleth/proxy.eduteams.org-frontend.xml

Finally, set up the signing and encryption certificates.
Please note the filenames used for the signing and encryption certificates. See note in this document for help with these if required.

Code Block

language	xml

        <!-- Simple file-based resolvers for separate signing/encryption keys. -->
        <CredentialResolver type="File" use="signing"
            key="sp-key.pem" certificate="sp-cert.pem"/>
        <CredentialResolver type="File" use="encryption"
            key="sp-key.pem" certificate="sp-cert.pem"/>

You can use the command shib-keygen to create the signing and encryption pairs.

shib-keygen -h [your_sp_domain]

eg

shib-keygen -h example.com

Next, edit the file /etc/shibboleth/attribute-map.xml

The eduTEAMS service provides a number of attributes for authenticating users. The attribute "eduPersonUniqueId" (see Attributes available to Relying Parties#eduTEAMSIdentifier) is the preferred attribute for identifying a remote user.

This edit of the attribute map works alongside the REMOTE_USER="eduPersonUniqueId" edit you made in the shibboleth2.xml file.

Add the following three lines before the closing "</Attributes>" :

Code Block

language	xml

<Attribute name="urn:oid:1.3.6.1.4.1.5923.1.1.1.13" id="eduPersonUniqueId">
   <AttributeDecoder xsi:type="StringAttributeDecoder" caseSensitive="false"/>
</Attribute>

2. Apache configuration

You will need to configure Apache to recognize Shibboleth as an authorization "gatekeeper".

You can do this at the VirtualHost level, for example. Here we show a very basic example. Other recipes are available. See for instance the Shibboleth Wiki at https://wiki.shibboleth.net/confluence/display/SP3/Apache

<VirtuaHost example.com:443>

...

...

   <Location />

      AuthType shibboleth

      <IfVersion < 2.3>

         ShibCompatWith24 On

      </IfVersion>

      ShibRequestSetting requireSession true

      ShibUseEnvironment On

      require shibboleth

   </Location>
   ...</VirtualHost>

Code Block

language	vb

<VirtualHost example.com:443>

...

<Location />

AuthType shibboleth

<IfVersion < 2.3>

ShibCompatWith24 On

</IfVersion>

ShibRequestSetting requireSession false

ShibRequestSetting requireSession 1
ShibUseEnvironment On


</Location>


</VirtualHost>

2a. Entitlements (authorization)

An authenticated user will have a number of "entitlements" associated with their account.

These entitlements are presented to your SP in the form of the following:

Attribute FriendlyName="eduPersonEntitlement" Name="urn:oid:1.3.6.1.4.1.5923.1.1.1.7" NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri"

- within the SAML assertion.

The apache webserver populates the server environment with the variable "entitlements" and populates it accordingly.

See the example to the right.

Code Block

language	xml

            <ns1:Attribute FriendlyName="eduPersonEntitlement"
                           Name="urn:oid:1.3.6.1.4.1.5923.1.1.1.7"
                           NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:uri"
                           >
                <ns1:AttributeValue xmlns:xs="http://www.w3.org/2001/XMLSchema"
                                    xsi:type="xs:string"
                                    >urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS#acc.eduteams.org</ns1:AttributeValue>
                <ns1:AttributeValue xmlns:xs="http://www.w3.org/2001/XMLSchema"
                                    xsi:type="xs:string"
                                    >urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:gitlab#acc.eduteams.org</ns1:AttributeValue>
                <ns1:AttributeValue xmlns:xs="http://www.w3.org/2001/XMLSchema"
                                    xsi:type="xs:string"
                                    >urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:gitlab:admin#acc.eduteams.org</ns1:AttributeValue>
                <ns1:AttributeValue xmlns:xs="http://www.w3.org/2001/XMLSchema"
                                    xsi:type="xs:string"
                                    >urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:Developers#acc.eduteams.org</ns1:AttributeValue>
                <ns1:AttributeValue xmlns:xs="http://www.w3.org/2001/XMLSchema"
                                    xsi:type="xs:string"
                                    >urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:gitlab:audit#acc.eduteams.org</ns1:AttributeValue>
            </ns1:Attribute>

Is presented to your Apache instance as:

[entitlement] => urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS#acc.eduteams.org;urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:gitlab#acc.eduteams.org;urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:gitlab:admin#acc.eduteams.org;urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:Developers#acc.eduteams.org;urn:geant:eduteams.org:service:eduteams-acc:group:eduTEAMS:gitlab:audit#acc.eduteams.org

- that is, a colon (":") separated list.

4. Conclusion

You should now have a working integration of Apache and Shibboleth v3 SP services on your machine.

Page tree

Versions Compared

Old Version 16

New Version 17

Key

1. Shibboleth configuration

2. Apache configuration

2a. Entitlements (authorization)

3. Restarting the shibd and apache2 services

4. Conclusion