...
Due to the lack of servers we need to make some additional settings on the HCoS#2 server itself to isolate 2 ports belonging to different logical servers (HCoS#2-D and HCoS#2-B) in order to achieve that the traffic from the first server passes through both MX204 routers and reaches the second server. We added some lines in the following files:
| Code Block |
|---|
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto em1
iface em1 inet static
address 10.1.1.22
netmask 255.255.255.0
network 10.1.1.0
broadcast 10.1.1.255
gateway 10.1.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 8.8.8.8
up ip netns add isolated
up ip link set dev p4p2 netns isolated
up ip netns exec isolated ip addr add 192.168.2.1/24 dev p4p2
up ip netns exec isolated ip link set p4p2 up
#auto p4p2
#iface p4p2 inet static
# address 192.168.2.1
# netmask 255.255.255.0
auto p4p1.10
iface p4p1.10 inet static
address 192.168.0.2
netmask 255.255.255.0
vlan-raw-device p4p1
auto p4p1.20
iface p4p1.20 inet static
address 192.168.1.2
netmask 255.255.255.0
vlan-raw-device p4p1
auto p4p1.30
iface p4p1.30 inet static
address 192.168.2.2
netmask 255.255.255.0
vlan-raw-device p4p1 |
/etc/network/interfaces file
...